|
ESCOWELD 7505E/7530
High Strength, Very Fluid,
3-Part Epoxy Grout
Product Description: ESCOWELD 7505E/7530 is a highly flowable, epoxy grout system engineered for use with dynamically operated industrial machinery and equipment where performance and operating reliability are crucial. ESCOWELD grout functions as a critical interface between the equipment and its foundation ensuring proper transference of static and dynamic loads generated by operating equipment to the foundation. This allows the foundation to efficiently absorb and dissipate the loads true to its purpose.
ESCOWELD Epoxy Grout provides proper support for the operating equipment. When coupled with a properly designed anchoring system, ESCOWELD grout maintains critical shaft alignment fundamental for optimum performance of rotating and reciprocating equipment.
ESCOWELD 7505E/7530 also offers improved resistance to many industrial chemicals that would typically destroy conventional cement grouts. A foundation too, is subject to chemical attack. If the foundation mass is reduced by chemical attack, so is its effectiveness as a support and damping mechanism. Using guidelines available from ITW Philadelphia Resins, ESCOWELD grout can also be used to protect concrete foundations from chemical attack that would otherwise deteriorate as a result.
|
 Use & Benefits: The key to the performance of ESCOWELD 7505E/7530 is the combination of ESCOWELD 7505E, a versatile liquid epoxy resin/hardener system, with ESCOWELD 7530, a engineered silica aggregate specifically designed for greater flowability, strength and self-leveling characteristics. Other unique features and benefits that have been offered for over 20 years with ESCOWELD 7505 include:
-
Excellent bondability to itself without surface preparation
to simplify multiple pour projects.
-
Wide range of depth of pour, from 1-1/2” to 18”. This simplifies
and speeds up many jobs that would otherwise have required
multiple pours and additional surface preparation.
-
Cures in 24 hours which is especially valuable during
tight turn-around schedules or emergency repairs.
-
Exceptional dimensional stability as well as excellent
resistance to chemical and physical degradation.
-
Negligible shrink on cure.
Design Consideration: For optimum results, follow the recommendations closely for site preparation, grout mixing, grout placement, and grout finishing, etc. found in “ESCOWELD 7505E/7530 Installation Procedures, Bulletin No. 1600.
Application Instructions: The performance of any epoxy machinery grout system depends not only on the engineering and physical characteristics of the cured grout, but also on the quality of the mixing and installation. Proper mixing of all components is particularly important in obtaining the maximum strength and adhesive characteristics of epoxy grouts.
-
ESCOWELD 7505E is packaged in a single can. Lower portion contains Epoxy Resin and upper portion contains the converter. Pour entire contents of converter into the Epoxy Resin container and mix properly.
-
Mix ESCOWELD 7530 aggregate into combined liquid components in a wheelbarrow or mechanical mixer (mortar/plaster mixer) until all dry particles are wetted out.
See Technical Data Sheet and MSDS for more product information.
|
 Technical Information: Technical Data Sheets • MSDS |
] RETURN TO TOP [
|
Advantages of
Epoxy Grout
-
Usage in corrosive and
external applications.
-
Limited down time during
outages and emergencies.
-
High bond strength dampens
vibration thus extending the life
of machinery components.
-
Excellent flowability insures
maximum bearing contact.
-
Support by local distributor in
all aspects of grouting.
|
Epoxy Grout -vs- Cement
|
1. Compressive Strength
15300 - 19000 psi. |
3000 - 6000 psi. |
2. Tensile Strength
1890 – 4970 psi. |
400 – 600 psi. |
3. Will not shrink in
liquid or solid state. |
Can shrink in liquid
and/or solid state. |
4. Impervious to most
liquids, chemicals,
lubricants and
freeze / thaw cycles. |
Can be affected by all. |
5. Rapid cure 24-36 hrs.
at 70 degrees F. |
Slow curing,
7-21 days. |
6. Extremely high bond
strength to steel
and concrete. |
Low bond strength. |
7. No components
to measure. |
Must adjust water for
flowability & strength. |
8. Epoxies can be
poured from 1/4"-18"
thick in one layer. |
Must be pumped in
tight clearances. |
|
|
Chockfast Grout - Engineered Grouting and Chocking Compounds
for large compressors and other high - dynamic, industrial machinery
to enhance performance and lower operating costs.
Find more industrial grout products at chockfastgrout.com...
Chockfast Red | Chockfast Red SG | CWC 604 Machine Bond
Chockfast Blue | Chockfast Orange | Chockfast Black | Chockfast Gray
ITW Quickset | ITW PRC 100 Non-Shrink Grout
ITW PRC Expansion Compound | IMPAX Flexible Joint Sealant
ITW PRC Repair Compound | ITW PRC Rust Inhibitive
ITW PRC Concrete Adhesive | ITW PRC Rust inhibitive Primer 7CZ
Super Alloy Titanium Repair Compound | Super Ceramic Repair Putty
Super Ceramic Repair Liquid | Philly Bond #6 | Philly Bond #8
IMPAX IXT - 59 Solvent | Release Agent
|
We're here to help.
Call (800) 631-4688
|
